Attaching And Detaching The Port - Sea&Sea MDX-7D Instruction Manual

Attaching and Detaching the Port

In order to use this product underwater, the optional port for the camera
lens must be attached to this product.
CAUTION
Only the optional ports designed for SEA&SEA digital SLR camera housings
can be attached to this product.
This product is delivered with a housing body cap attached to the port mount.
Make sure to remove the housing body cap when attaching the port.
The housing body cap has no watertight capability.
When attaching the port to the housing, always refer to the instruction
manual provided.
1
Pull the port lock on the underside
of the quick shoe base toward
OPEN until you hear the sound
of it clicking into place
2
Align the positioning mark on the
front case with the OPEN mark
on the port, insert the port into
the front case, and then rotate
the port in a clockwise direction
until it stops
CAUTION
Before attaching the port, make sure
there are no specks of dust, scratches,
or deformities on the O-ring and the
O-ring contact surfaces.
3
Make sure that the positioning
mark on the front case and the
LOCK mark on the port are aligned
4
Push the port lock toward LOCK
until you hear the sound of it
clicking into place
Make sure that the port lock pin is
engaged with the notch in the port.
E-13
OPEN
LOCK
Port lock pin
OPEN
LOCK