With The Ys Converter - Sea&Sea MDX-7D Instruction Manual

With the YS converter

1
Remove the two screws from
the grip for your left hand,
and then remove the parts
(bracket shoe / lanyard hook)
2
Fit the YS converter attachment
plate in between the grip and
the parts you removed, and
then fasten it in place with the
screws included with the YS
converter
3
Connect the YS converter's
connecting cable to the YS
converter connector
Refer to the instruction manual
provided with the YS converter
for details.
CAUTION
Refer to the instruction manual provided with the strobe and the YS converter
for connection of the YS converter to the strobe.
Using incompatible strobes in combination with the YS converter may result
in incorrect operation or cause the camera and strobe to malfunction.
If not connecting the YS converter, do not remove the connector cap from
the YS converter connector. Make sure the cap is firmly secured to avoid
water leakage due to a loose cap.
After the equipment is connected to the housing, make sure to check that
the connected strobe and YS converter function correctly before underwater
use.
Connecting the Strobe
Bracket shoe
Lanyard hook
YS converter
YS converter
Connecting
cable
YS converter connector
Grip
Mounting
plate
Grip
E-22