When Reinstalling The By-Pass Paper Size Sensor - Ricoh D025 Service Manual

Paper Feed

When reinstalling the by-pass paper size sensor

1. Adjust the projection [A] of the left side fence bar (it must be centered).
2. Install the by-pass paper size detection switch so that the hole [B] in this switch faces
the projection [C] of the left side fence bar.
3. Reassemble the copier.
4. Plug in and turn on the main power switch.
5. Check this switch operation with SP5803-011 (By-pass paper size < Input Check).
- Display on the LCD -
Paper Size
A3 SEF
B4 SEF
A4 SEF
B5 SEF
D023/D025
Display
00001110
00001100
00001101
00001001 Smaller A6 SEF
4-122
Paper Size
A5 SEF
B6 SEF
A6 SEF
Display
00001011
00000011
00000111
00001111
SM