Table of Contents
Advertisement
Shift lever
The shift lever is mounted on the left side of the engine. The position of
the gears is shown in the illustration. Neutral, or the idle speed, is located
between first and second gear.
2,3,4,5,6
N
1
Side stand
1
The side stand
is coupled with a safety starter system. Pay attention to
Driving Instructions.
NOTE:
A center stand is available as an accessory from your authorized KTM
workshop. The side stand does not need to be removed.
1
11
Foot brake pedal
2
The foot brake pedal
is located in front of the right footrest. Its basic
position can be adjusted to your seat position (see maintenance work).
2
Compression damping of fork
The fork's damping action during compression travel (compression dam-
ping) can be adjusted. This allows you adjust the damping behavior to
match your driving style and the payload.
4
3
The adjusting screws
are located under the cap
on the lower end of
the fork legs.
More information is provided in the chapter "Adjusting the fork and shock
absorber."
4
3
Rebound damping of fork
The fork's damping action during rebound travel (rebound damping) can
also be adjusted. This allows you adjust the damping behavior to match
5
your driving style and the payload.
5
The adjusting screws
are located on the upper end of the fork legs.
More information is provided in the chapter "Adjusting the fork and shock
absorber."
5
Advertisement
Table of Contents
