Port Fiber - Huawei Quidway S3026C-PWR Installation Manual

Installation Manual
Quidway S3026C-PWR Ethernet Switch
Table 7-13 LEDs on 100Base-FX multimode module
LED
LNK
ACT

7.7.2 Port Fiber

100Base-FX single mode/single mode medium-haul/multimode modules match SC
connector.
Figure 7-12 SC connector
Caution:
When connecting SC connector, connect the transmit end at the switch side to the receive end of the
peer and connect the receive end to the transmit end of the peer.
The following table summarizes port attributes of 100Base-FX single mode /single
mode medium-haul /multimode modules.
OFF
ON
OFF
Flashing
Huawei Technologies Proprietary
7-12
Chapter 7 Optional Modules
Status
The link is down.
The link is up.
No packets are being transmitted/received.
Packets are being transmitted/received.