Installation Manual
Quidway S3026C-PWR Ethernet Switch
RJ-45
3
4
5
6
7
8
3.3.2 Connecting Console Cable
When configuring the switch at the terminal, connect the Console cable as
described below:
Step 1: Plug the DB-9 female connector of Console cable to the serial port of the PC
where the switch is to be configured.
Step 2: Connect the RJ-45 connector of Console cable to the Console port of the
switch.
Caution:
Identify the interface before plugging the connector into it.
Note:
You cannot insert or remove the serial plug in or from the PC when the switch is powered on. For
connecting the PC to the switch, first connect the DB-9 end to the PC and then the RJ-45 end to the
switch. Remove it in inverse order.
3.4 Installation of Optional Interface Modules
3.4.1 Installing Optional Interface Modules
Signal
TXD
CD
GND
RXD
DSR
CTS
Huawei Technologies Proprietary
3-8
Chapter 3 Installation
Direction
←
→
-
→
→
→
DB-9
3
1
5
2
6
8