Freestanding The Switch On A Tabletop - Huawei Quidway S3026C-PWR Installation Manual

Installation Manual
Quidway S3026C-PWR Ethernet Switch
Figure 3-1 Mounting the switch on a 19-inch rack
Note:
The mounting ears are used for fixing rather than bearing. When the switch is mounted on a 19-inch
standard rack, it should be borne by slide rails (fixed on the rack).

3.1.2 Freestanding the Switch on a Tabletop

If there is no 19-inch standard rack, you may have to place the switch on a clean
tabletop, which is a relatively easy way to operate. The user needs only pay
attention to the following during such operation:
Make sure that the table is stable and well grounded.
Leave about 10 centimeters of space around the switch for heat dissipation.
Do not place heavy objects on the top of the switch.
Huawei Technologies Proprietary
3-2
Chapter 3 Installation