Huawei Quidway S3026C-PWR Installation Manual page 51

Installation Manual
Quidway S3026C-PWR Ethernet Switch
II. Loading BOOTROM
Step 1: Select an Ethernet port for downloading on the switch. Connect the switch to
the PC having the desired file via the Ethernet port (the IP address of the PC is
already known). At the same time, via the Console port, the switch is connected to a
PC, which can be the aforementioned one.
Step 2: Run the FTP server on the PC connected to the Ethernet port, configure
FTP username and password, and specify a file directory for loading.
Step 3: Run terminal emulation on the PC connected to the switch. Start the switch,
enter the Boot menu and then the menu for choosing loading protocol.
In the Boot menu, press Ctrl+U when the system prompts Enter your choice (0-5) to
enter the menu for choosing loading protocol.
Enter your choice(0-5):
Please set bootrom download protocol parameter:
1. Set TFTP protocol parameter
2. Set FTP protocol parameter
3. Set XMODEM protocol parameter
0. Return to boot menu
Choose the desired protocol to load Boot ROM.
Step 4: Choose option 2, that is, choosing FTP protocol and the system enters the
menu for setting protocol parameters.
Load File name
Switch IP address
Server IP address
FTP User Name 
FTP User Password
Step 5: Enter correct information as needed and the system displays the following
information:
Are you sure to update your bootrom?(Y/N)
Step 6: Type Y and the system starts downloading the file; type N and the system
returns to the download program menu. Take the first case as an example. When
the Boot ROM is successfully downloaded, the system writes the file into the flash
memory and then the terminal prompts this information:
Initializing net....done!
Loading.........................done!
Bootrom is updating now.....................................done!
Chapter 5 Loading BOOTROM and Host Software
Huawei Technologies Proprietary
5-10