Basic Operation; Turning The Power On And Off - Eclipse CD1200G Manual

Basic operation

[MUTE/PWR] button
This section covers basic operating procedures. For additional details,
please refer to the sections on specific functions.

Turning the power on and off

Turning the power on and off.
When the power is turned on, the state used when the power was turned
off such as CD and tuner playing is restored.
1
When power is OFF, press the [MUTE/PWR] button.
The power will come ON.
When the main unit's power is turned on for the first time or if the
ATTENTION
battery terminals have been disconnected because of a reason such
as vehicle maintenance and the power is then turned back on, the
main unit will start up in FM1 mode. After this, the broadcast stations
will be searched for automatically and stored in buttons [1] to [6].
2 When power is ON, press and hold the [MUTE/PWR] button
until you hear a beep.
The power will go OFF and the main unit will be in Standby.
Basic operation
23