Eclipse CD1200G Manual page 3

● Wiring and installing this main unit requires expertise and
experience. Professional installation is recommended. Consult with
your dealer or a professional installer. Incorrect wiring may damage
the main unit or interfere with safe vehicle operation.
● Use only the accessory parts as specified. Using other parts may
cause damage to the main unit or cause parts to dislodge and/or
detach unexpectedly.
● Do not install the main unit in places where it may get dew
condensation on (around the air conditioning hose, etc.), come in
contact with water, or in condition of high moisture, dust or oily
smoke. If water, moisture, dust or oily smoke enters this main unit,
smoke, fires or malfunctions may result.
● Avoid installing in places where it cannot be fastened securely or
where there are strong vibrations. Otherwise, the main unit may
come loose due to vibration while driving, causing problems for
driving and resulting in traffic accidents or injuries.
● Do not install in places with direct sunlight or where it will be hit
directly by hot air from the heater. This may increase the temperature
of the interior of this main unit, resulting in fires and malfunctions.
● Do not obstruct the air flow of the heat sink or vents of this main
unit. When the air flow of the heat sink or vents are obstructed, the
interior overheats, and fires may result.
● Connect as specified in the installation manual. If not connected as
specified, fires or accidents may result.
● When installing in vehicles equipped with air bags, check the
manufacturer's cautions regarding operation to ensure proper
operation of the airbags.
● Install wiring in a manner that will not allow them to be pinched
by moving parts, damaged by screws, or damaged by metal parts.
Accidents, fires and shocks may result from disconnection and
electrical shorts.
● Avoid hot surfaces when wiring main unit. High temperatures may
damage wiring, causing shorts, arcing and fires.
Warning
5