Loading Paper Into The Bypass Tray; To Load Paper (Bypass Tray) - Konica Minolta bizhub C450 Copy Operations

2
2.7

Loading paper into the bypass tray

Paper can be fed manually through the bypass tray if you wish to copy onto
paper that is not loaded into a paper drawer, or if you wish to copy onto thick
paper, postcards, envelopes, overhead projector transparencies or label
sheets.

To load paper (bypass tray)

1
Open the bypass tray.
– When loading large-sized paper,
pull out the tray extension.
2
With the side to be printed on facing down, insert the paper as much
as possible into the feed slot.
3
Slide the lateral guides to fit the size
of paper being loaded.
2-56
Before making copies
Tray extension
Lateral guides
C450