Konica Minolta bizhub C450 Copy Operations page 137

Basic copy operations
4
Using the keypad, type in the desired
number of copies.
– If the number of copies was incor-
rectly entered, press the [C] (clear)
key in the keypad, and then specify
the correct number of copies.
5
Press the [Start] key.
– To stop the copy operation being
performed, press the [Stop] key.
For details, refer to "Stopping scan-
ning/printing" on page 3-87.
– The next copy operation can be
queued while a copy operation is
being performed. For details, refer
to "Scanning the next document to
be copied while a copy job is being printed (Next Job Reservation)"
on page 3-85.
C450
3
3-5