Pace TDC779X Service And Installation Manual page 50

MAKING USER SETTINGS (cont.)
If you want to change the setting, press U or D. Press the select button to confirm the choice
3.
and change to the new setting.
Press the L button. The front panel displays "PiLL" again.
4.
To continue making the settings, see the next section.
16:9 picture in a 4:3 transmission
Sometimes 4:3 transmissions may contain a 16:9 picture, with black borders at the top and bottom. On a
16:9 TV this may display with black borders all the way around the picture. To remove these borders, you
can use the "Zoom function" button on the remote control (could be labeled Zoom or Aspect).
See the example below. For more information about using "Zoom," see page 54.
4:3 transmission 16:9 TV with no automatic
Auto-pillarbox switched off

NOTE
16:9 TV with no automatic
detection of 4:3, detection of 4:3,
Auto-pillarbox switched on
Use 'Zoom' to increase the picture size.
(Note: the picture may lose some
definition due to the expansion)