Digital Equipment DEClaser 3500 Installation Manual page 3

. . . . . . . . . . . . . . . . . . . . . . . .
Approval Information for Australia
Failure to set the modem, and any communications software
used with the modem, to the values contained in the following
table, will result in the modem being operated in a non-
compliant manner. Consequently, there would be no permit in
force for this equipment and the Telecommunications Act 1991
prescribes a penalty of $12 000 for the connection of non-
permitted equipment.
S-Register Function
S0 Number of rings to answer
S6 Blind dial wait time
S7 Wait for carrier time
S10 Loss of carrier disc.
PTT Approval Information For Holland
The DEClaserFAX is made in England and is approved in
Holland for connection to the general switched telephone
network, either directly or through an approved PABX. Users
with modem line connections to some types of PABX or
switched network exchanges must be aware that such equipment
may take between 5 and 40 seconds to return a dial tone after
the DEClaserFAX seizes the line.
Due to PTT approval or other statutory requirements, the
following differences exist in the operation of the
DEClaserFAX when configured for use in Holland and the
standard UK configuration:
• Blind dialling
Dialling in the absence of a dial tone is not permitted.
Therefore, the X options that cause the DEClaserFAX to
ignore the dial tone, X0 and X3, are disabled.
• Comma pause
Register S8 is not applicable and any comma included in a
dial string is ignored. Therefore, the "," option (the comma
character) that inserts a pause during dialling is not
permitted.
190287-001 - 06/01/95 - - Saved by IDC - -
Rev # 2 - File Name EXFX_US6.DOC
Default Permitte
d Range
2 1 to 4
4 2 to 4 Seconds
55 4 to 55 Seconds
14 0 to 30 Seconds
Units
Rings
3