Digital Equipment DEClaser 3500 Installation Manual page 19

. . . . . . . . . . . . . . . . . . . . . . . .
A. PLUG THE TELEPHONE CABLE INTO THE
DECLASERFAX'S PSTN PORT.
The telephone cable connects the DEClaserFAX to the public
telephone network. One end of the lead has a clear RJ11-style
plug. The other end has a plug for connection to the wall
socket, either directly or using an adapter.
Plug the RJ11-style plug into the PSTN port of the modem, the
square 6-pin socket.
B. IF USING AN ADAPTER, PLUG THE OTHER END
OF THE CABLE INTO THE ADAPTER.
C. PLUG THE ADAPTER OR TELEPHONE CABLE
INTO
WARNING:
!
the modem before you connect the modem to the
telephone system. Once the cable has been
connected, it cannot be removed without the use of a
small screwdriver. This is deliberate and is intended
to prevent accidental shock from
Telecommunications Network Voltages (TNV).
190287-001 - 06/01/95 - - Saved by IDC - -
Rev # 2 - File Name EXFX_US6.DOC
THE WALL SOCKET.
Be sure to plug the telephone cable into
19