Digital Equipment LN15X-DA User Manual

Duplexing unit

Advertisement

Quick Links

DIGITAL LN15X-DA
Duplexing Unit
User Manual

Advertisement

Table of Contents
loading

Summary of Contents for Digital Equipment LN15X-DA

  • Page 1 DIGITAL LN15X-DA Duplexing Unit User Manual...
  • Page 3 IL-2...
  • Page 4 Preface This user’s manual provides installation procedures and some other important information. For solving problems, also refer to the User’s Manual of the printer. Icons draw your attention to advisory messages, as illustrated below. Conventions A line precedes and follows the message to show where the message begins and ends.
  • Page 5 Learning the Duplex Unit Features The duplex unit, easily installed at the bottom of the printer, enables you to print on both sides of paper of standard sizes. • Printable paper sizes are A4, B5, A5, Legal, Letter, and Executive. •...
  • Page 6: Paper Paths

    Paper Paths The illustration below shows the routes of paper feeding in the printer including the duplex unit and other standard and optional components. Understanding of these paths are useful to remove jammed paper. Printer ® q, w Paper tray q: First printing w: Second printing ®...
  • Page 7: Preparing The Printer

    Preparing the Before installing the duplex unit, prepare your printer. Printer • First turn power off. • Disconnect the power cord from both printer and power outlet. • Disconnect the interface cable from the printer. • Remove the multi-function feeder (MFF). •...
  • Page 8 Notice: If your printer is equipped with an optional paper feeder, dismount the printer from the paper feeder. Then, mount the duplex unit on the paper feeder, lock the paper feeder, and the printer on the duplex unit. 2. Connect the power cord to the printer. 3.
  • Page 9 5. Press the ENTER button to select the page format menu. COPIES The message changes to COPIES 1* 6. Press the MENU button five times to display the desired item of the page format menu. The message changes to DUPLEX MODE DUPLEX MODE OFF* OFF* 7.
  • Page 10: Removing The Duplex Unit

    Using the Rear Stacker The rear stacker of the duplex unit has the same function with that of the printer. 1. Open the rear stacker of the duplex unit. 2. Raise the paper support wire. 3. Set the paper path select lever forward the printer. Be sure to move the lever all the way until it is stopped.
  • Page 11: If Something Goes Wrong

    If Something Goes Wrong This section briefly discusses the most common problems you might encounter. For more complete troubleshooting information, refer to Chapter 6 of the printer user’s manual. Problem Causes and solutions The printer does not Cause: The printer cannot know that the print on both sides.
  • Page 12: Specifications

    Specifications Specification Description Feeding speed 14 pages per minute for A4-size paper Dimensions Together with printer Width: 376.5 mm (14.8 inches) Depth: 550 mm (21.7 inches) Height: 393 mm (15.5 inches) Weight 11 kg (24.3 pounds) Power requirements 100-120 VAC ( 10%), 50/60 Hz (+2%, -4%) 220-240 VAC ( 10%), 50/60 Hz (+2%, -4%) Environmental Temperature: 10 to 35 C (50 to 95 F)

Table of Contents