Disassembly method
<Main body>
Removing the metal cover
1.
Remove the six screws A on the back of the body.
2.
Remove the two screws B
body.
3.
Remove the metal cover from the body by lifting the
rear part of the cover.
CAUTION:
Do not break the front panel tab fitted to
the metal cover.
(See Fig.1 to 3)
on both sides of the
A
A
Fig.1
Metal cover
B
Fig.2
Metal cover
Fig.3
MX-DVA9/MX-DVA9R
Metal cover
A
B
1-7