Front Panel Assembly - JVC MX-DVA9 Service Manual

<Front panel assembly>
Prior to performing the following procedure, remove
the metal cover, the DVD changer mechanism
assembly and the front panel assembly.
Removing the cassette
assembly (See Fig.31)
1. Disconnect the card wire from connector CN306 on
the head amplifier & mechanism control board.
2. Remove the seven screws N attaching the cassette
mechanism assembly.
Removing the display system control
board (See Fig.32 to 34)
1. Remove the four screws O
bracket.
2. Disconnect the card wires from connector CN316
and CN881 on the display system control board.
3. Remove the six screws P
system control board.
4. If necessary, disconnect the wire from connector
CN870 on the front side of the display system control
board and unsolder FW915.
mechanism
attaching the stay
attaching the display
(Solding)
Display system control board
Head amplifier
& mechanism control board
CN306
N
N
Cassette mechanism
assembly
Fig.31
O
Display system control board
Fig.32
P
CN316
P
FW915
P
CN881
Fig.33
CN911
Fig.34
MX-DVA9/MX-DVA9R
N
N
N
O
Stay bracket
CN870
P
P
Display system control board
CD eject board
FW915
FW915
1-15