JVC MX-DVA9 Service Manual page 21

Removing the DVD mechanism
assembly(See Fig.10)
1. While turning the cams R1 and R2 assembly in the
arrow direction "H" . align the shaft "I" of the DVD
mechanism assembly to the position shown in Fig.10.
2. Remove the four screw 6 retaining the DVD
mechanism assembly.
Removing the DVD mechanism
1. For dismounting only the DVD machanism without
removing the DVD mechanism assembly, align the shaft
"J" of the DVD mechanism assembly to the position
shown Fig.11 while turning the cam R1 and R2
assembly in the arrow direction "K" .
2. By raising the DVD mechanism assembly in the arrow
direction "L" , remove the assembly from the lifter unit
Cam R1, R2 assembly
J
Fig.11
(See Fig.11 and 12 )
(See Fig.12).
K
Arrow
Cams R1, R2 assembly
Arrow
H
I
6
6
CD mechanism assembly
Fig.10
10
Lifter unit
MX-DVA9/MX-DVA9R
6
6
CD mechanism
L
Arrow
Fig.12
1-21