Ericsson BUSINESSPHONE 250 User Manual page 33

DIAL-BY-NAME
Head Office
Program dial-by-name
Program
BusinessPhone 250 - Analogue Telephone
BusinessPhone 50 - Analogue Telephone
Note: This section only applies to the Ericsson Medium telephone.
You can program and activate directory numbers (extensions
and common abbreviated numbers) on the programmable keys.
Stored numbers can consist of maximum 16 digits.
Lift the handset
Press to make a call (pre-programmed)
How to program a directory number on the programmable keys.
Lift the handset
Press
Dial the number
You can use any directory number, e.g. a common
abbreviated number or a colleague's extension number.
You can also store codes that contain * and # but not R.
To store a number that incorporates a wait for a new dial
tone, see section "Outgoing calls".
Press a programmable key
If a number is already stored, it will be erased automatically.
If you would like to erase a dial-by-name number, store a "0"
instead of the telephone number.
Note: You can remove the transparent cover in order to write the
names beside the keys.
Replace the handset
ABBREVIATED NUMBERS
33