Using The Web Interface - Lantronix SecureLinx Quick Start Manual

S e c u r e L i n x M a n a g e m e n t A p p l i a n c e
CONFIGURING NETWORK SETTINGS CONTINUED...

USING THE WEB INTERFACE

Once the SLM has an IP address, you can use the web interface to configure
required settings.
To log in to the web interface:
1. Open a web browser (Netscape Navigator 6.x and later or Internet Explorer 5.5
and later with JavaScript enabled).
2. In the URL field, type https:// followed by the IP address of your SLM.
3. Log in as the system administrator (default user name sysadmin and
password PASS). The SLM home page opens.
SLM Home Page
8
Q u i c k S t a r t G u i d e
CONFIGURING NETWORK SETTINGS CONTINUED...
To enter required settings for one network port:
1. On the menu (in the pane on the left), click Configuration➔ Network Settings.
The following page opens:
Network - Settings Page
2. Enter the following information:
Network Port 1
Network Port Disabled: This is the default setting for Network Port 2.
Settings
W W W . L A N T R O N I X . C O M
9