Lantronix SecureLinx Quick Start Manual page 5

S e c u r e L i n x M a n a g e m e n t A p p l i a n c e
CONFIGURING NETWORK SETTINGS CONTINUED...
4. Enter the following information at the prompts:
Note: To accept a default or to skip an entry that is not required, press Enter.We recommend that while you are
logged in, you change the default password to prevent access by unauthorized personnel.
Configure Select one of the following:
<1> obtain IP Address from DHCP: The unit acquires the IP address
Port 1 or 2
and gateway from the DHCP server.This is the default setting.
<2> obtain IP Address from BOOTP: Permits a network node to
request configuration information from a BOOTP "server" node.
<3> static IP Address: You must assign a static IP address manually.The
administrator generally provides the IP address.
Note: Network port 1 is 10/100/1000Base-T, while network port 2 is 10/100Base-T.
IP Address An IP address that will be unique and valid on your network
(if specifying) and in the same subnet as your PC.
Note: Enter all IP addresses in dot-quad notation.
Subnet Mask The subnet mask specifies the network segment on
(if specifying an IP address) which the SLC resides.
Default Gateway IP address of the router for this network.
Hostname The default host name is SLM. The host name can be a short
host name or a fully qualified domain name.
Time Zone If the time zone displayed is incorrect, enter the correct time
zone and press Enter.
Date/Time If the date and time displayed are correct, type n and continue.
If the date and time are incorrect, type y and enter the correct
date and time in the formats shown at the prompts.
6
Q u i c k S t a r t G u i d e
CONFIGURING NETWORK SETTINGS CONTINUED...
Sysadmin Enter a new sysadmin password. It can have up to
password
128 characters and is case sensitive.
Once you complete the Quick Setup script, the changes take effect immediately.
Notes: • For general command line interface help, type help at the command line.
• For help with a specific command, type help followed by the
command, for example, help set network .
Completed Quick Setup
W W W . L A N T R O N I X . C O M
7