Digital Instrument Panel Support; Front/Rear Handlebar Cover - PIAGGIO X9 500 cc Service Manual

Bodywork

Digital instrument panel support

- Remove the three fixing screws.
- Detach the electrical connectors.
- Remove the support with the digital instrument panel.
- Pay special attention to the electrical connectors.
Front handlebar cover
- Loosen the two screws fixing the radio-interphone
unit.
- Detach the electrical connectors.
- Remove the radio-interphone.
- Remove the two handlebar cover lower screws (one
on each side).
- Remove the brake fluid pump cover on the right side.
- Remove the front handlebar cover.
Rear handlebar cover
- Remove the three fixing screws.
- Detach the electrical connectors.
- Remove the rear handlebar cover.
8 - 4
08_005
08_006
08_007
08_008