Electrical Equipment Devices List; Electrical Cables Colour - PIAGGIO X9 500 cc Service Manual

Electrical equipment devices
1. Digital instrument panel (11 LED indicators).
2. Analog instrument panel (5 bulbs).
3. Headlight (2 parking light bulbs, 55/55W low/high
beam bulbs).
4. LH front turn indicators (10W bulb).
5. Rear brake light button.
6. Lights selector switch with headlight flash.
7. Turn indicator switch.
8. Horn button.
9. Hazard warning light button.
10. Reset button.
11. Trumpet horn.
12. Sidestand switch.
13. Voltage regulator.
14. Stand control unit.
15. Engine stop relay switch.
16. Electronic control unit relay switch.
17. Stand pump relay switches.
18. LH rear light (5W parking light bulb, 10W turn
indicator bulb).
19. Rear brake light (5 x 2.3W bulbs).
20. Number-plate light with bulb.
21. RH rear light (5W parking light bulb, 10W turn
indicator bulb).
22. 12V-14Ah battery.
23. Fuse box (3 x 7.5A fuse, 1 x 15A fuse).
24. Starting relay switch.
25. Flywheel magneto (375W).
26. Engine oil pressure sensor.
27. Coolant temperature sensor.
28. Engine rpm sensor.
29. Air temperature sensor.
30. Idle speed adjusting motor.
31. Throttle potentiometer.
32. Petrol injector.
33. 2 stand switches.
34. Stand pump motor.
35. Injection electronic control unit.
36. Decoder.
37. Front brake light button.
38. Engine stop switch.
39. Wheel revolution sensor.
40. RH front turn indicator (10W bulb).
ELECTRICAL CABLES COLOUR: B=White - Bl=Blue
- G=Yellow - Mr=Brown - N=Black - BV=White-Green -
GN=Yellow-Black - Gr=Grey - Rs=Pink - R=Red -
Vi=Violet - V=Green - VN=Green-Black - BN=White-
Black - BBl=White-Blue - GV=Yellow-Green -
Ar=Orange - Az=Azure - GrBl=Grey-Blue - GrN=Grey-
Black.
Warning
- When working on the electrical equip-
ment, take special care to ensure that the leads that link
up to the electronic control device are properly con-
nected by observing the polarity and colour coding of
the connectors.
Electrical equipment diagram
41. Relay switch.
42. Lights switch.
43. Start button.
44. Stand button.
45. Immobilizer aerial.
46. Ignition switch.
47. Electric fan.
48. Electric fan relay switch.
49. Main relay switch.
50. HV coil.
51. Fuel gauge with pump.
52. Starter motor.
53. Helmet compartment lamp button.
54. Helmet compartment lamp.
55. 12V socket.
56. 2 rear fuse boxes for control unit (1 x 3A fuse, 1 x 5A
fuse, 1 x 10A fuse, 1 x 3A fuse).
57. Radio display.
58. Relay switch.
59. Outside temperature sensor.
60. Diode box (2 x 6A/2A diodes).
61. Fuse box (2 x 7.5A fuse, 1 x 15A fuse, 1 x 5A fuse).
62. Fuse box with base for stand pump (1 x 70A fuse).
63. Intercom/radio control unit.
64. Intercom connectors.
65. Relay signaler glued.
4
4 - 5