Zephyr Pyramid ZPY-E30AB Use, Care And Installation Manual page 17

SURFACE MAINTENANCE:
Clean the hood surface periodically with hot soapy water and clean cotton cloth. Do not use corrosive or
abrasive detergent, or steel wool/scouring pads which will scratch and damage surface. Do not use products
containing chlorine bleach or orange cleaners.
For heavier soil use liquid degreaser.
After cleaning, you may use non-abrasive stainless steel polish/ cleaners, to polish and buff out the stainless
luster and grain. Always scrub lightly using a micro fi ber or clean cotton cloth and with grain.
Aluminum Mesh Filters
The aluminum mesh filters are intended to trap residue and grease from cooking. Although the aluminum mesh
fi lters should never need replacing, they are required to be cleaned every 30 days or more often depending on
cooking habits.
Filters may be placed in dishwasher at low heat or soaked in hot soapy water Dry fi lters and re-install before
using hood.
Removing Aluminum Mesh Filters (Fig 5)
1. Push in on fi lter handles.
2. Pivot front of fi lter downward.
3. Remove fi lter by pulling away from hood.
Replacing Aluminum Mesh Filters
Hood Model:
All models and sizes
Part No. Qty. to Order.
50200030 2
Fig 5
15