Brief Introduction - HYT TC-268 Service Manual

Brief Introduction

1. Mode
User mode: Turn on the power to enter.
PC mode：Configure and adjust the radio data via PC software or programmer.
2. Parts description:
(1) Antenna
(2) Channel (frequency) selector knob
Turn the knob to select channel from 1~16(channel 16 may be programmed by your dealer as scan
channel).
(3) LED indicator
Red LED lights up while transmitting, green LED lights up while receiving a signal. LED flashes red
if the battery voltage goes low while transmitting.
(4) Power /Volume control knob
Rotate the knob clockwise to turn on the radio, anti-clockwise till a "click" is heard to turn off the
radio. When power on, rotate the knob to adjust the volume level.
(5) Speaker
(6) Microphone
(7) PTT switch (push to talk)
Hold down the PTT and speak into the microphone to transmit; Release the PTT to receive.
(8) Monitor key
Press the monitor key to open squelch; release to close squelch.
(9) Speaker/microphone jack
(10) Belt clip
(11) Battery
TC-268/368 Service Manual
3