Table of Contents
Advertisement
OM-2049
7. Optional Equipment
A. Trailer
The portable Jet-Ex 4 is mounted on an optional four-wheel trailer (see Figure 1) which consist of
front and rear axle assemblies. The axles are mounted directly to the main frame of the generator set.
It is available with or without the fenders, bumpers and cable trays. The front axle is a solid beam
type. Front wheels are mounted on spindles which are operated by tie rods connected to the hitch
and drawbar assembly. The spindles are mounted to the axle by means of torsional springs.
Any side-to-side movement of the drawbar turns the wheels in the direction of travel. The drawbar can
be folded upward and locked in the vertical position when the trailer is parked. The parking brake is
operated by a hand operated brake lever.
1-1
Page 12
1. Voltage Regulator
2. Overvoltage Relay
3. Excitation Rectifiers
4. Voltage Regulator Fuse
5. Voltage Sensing Relay
Control Panel Wrapper
Figure 5
May 20/89
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
