Kobalt SGY-APS41 User Manual page 16

ASSEMBLY INSTRUCTIONS
9. Plug airless paint sprayer (A) into grounded
outlet. Turn on power switch.
10. Slowly turn pressure control knob (F) clockwise
to prime/clean position.
11. Once motor is running, allow fluid to flow through
sprayer system and out through the prime tube (C)
into a waste pail for at least 45 seconds. This flushing
will remove any debris or oil in the system.
9
A
10
11
16
F
Hi Low Prime/
Spray Spray Clean
C
kobalttools.com
Roll