Kobalt SGY-APS41 User Manual page 12

UNDERSTANDING AIRLESS PAINT SPRAYER COMPONENTS
Tip Hole Size
(expressed as diameter, based
0.011 in. (0.28 mm)
0.013 in. (0.33 mm)
0.015 in. (0.38 mm)
0.017 in. (0.43 mm)
0.019 in. (0.48 mm)
• T p i i s e z 513 – Designed to be used with lighter materials; mostly stains, lacquers and enamels, along
with some lighter oil-based paints.
• T p i i s e z 517 – Designed to be used with paint and acrylics (both oil based and latex).
Note: ALWAYS
of the paint sprayer. Heavier materials will require a larger tip size. Lighter materials such as stains
and enamels may require a smaller tip size. Most spray material labels indicate the suggested or
recommended tip size for proper spraying. If you are uncertain which tip size is correct, consult your
local retailer for additional assistance.
ASSEMBLY INSTRUCTIONS
SETUP
1.
connections are properly secure. Fully tighten
using wrench (O).
Coating Selection
Stains Enamels
X
X X
X
12
Oil-based Interior
primers latex
and paints paints
X X
X X
X X
1
K
Exterior Acrylics
latex
paints
X
X
X
G
kobalttools.com
X
X
O