Takagi 110U Indoor (T-KJr2U-IN) Installation Manual And Owner's Manual page 28

CASE 3: Wrong connections between the "CHILD-1" unit and the "CHILD-2" unit
• If you connect the "PARENT" connector of the "CHILD-1" unit to the "1" connector of the
"CHILD-2" unit, the "CHILD-2" unit will operate as an individual unit, and will not be part of the
Easy-Link system.
PARENT unit
Connectors
Lower bank of
DIPswitches
Communica on cable
Connecting two "PARENT" connectors together from two separate units may
damage the computer board. The communication cable has a female end and
a male end so it's impossible to have a PARENT-to-PARENT connection with the
WARNING communication cable. Do not splice or modify connectors.
CASE 4: Remote controller connected to incorrect unit
• Remote controller has to be connected to the "PARENT" unit. If the remote controller is
connected to a "CHILD" unit, it will only control that particular individual "CHILD" unit and will
not control the Easy-Link system as a whole.
PARENT unit
Connectors
Lower bank of
DIPswitches
Communica on cable
CHILD-1 unit
Connectors Connectors
Lower bank of
DIPswitches
CHILD-1 unit
Connectors
Lower bank of
DIPswitches
28
Page
Installati on Manual
Installati on
CHILD-2 unit
Lower bank of
DIPswitches
Wrong
Connecti ons
Remote controller
Wrong Connecti ons