Download Print this page

Technical Specifications; Preset Radio Stations; Maintenance - Teac CRX-320 Instruction Manual

Dual alarm clock fm/am pll radio

Advertisement

Preset radio stations

You can store up to 10 stations for FM and up to 10 stations for AM.
1. Use the <TUNING> buttons to search for a station. Press and hold the
CLK/MEM button to store the station and a number to be assigned for the
preset will flash.
2. Press the <TUNING> buttons to change the number.
3. Press the CLK/MEM button again to confirm the setting.
4. Repeat steps (1) to (3) above to store other stations.
Listening to a preset station
While listening to the radio, press the CLK/MEM button to select a preset station.
The current time is always displayed. When you change to Radio mode, the
frequency will be displayed for 5 seconds and then the unit will go back to
displaying the time.
Care and maintenance
To clean the casing, unplug the unit and wipe off dust and stains with a soft,
damp cloth. Do not use benzene, thinner or other similar chemicals to clean the
casing.
If at any time in the future you should need to dispose of this product, please
note that waste electrical products should not be disposed of with household
waste. Find out where your nearest recycling centre is. Consult your local
authority or retailer for more details (Waste Electrical and Electronic
Equipment Directive).
Radio
Tuning range
Antenna
General
Output power
Power consumption
Speaker
Power source
Dimensions
Weight
Note: Due to continuing improvements, the technical specifications are subject to
change without notice.

MAINTENANCE

TECHNICAL SPECIFICATIONS

FM 87.5 – 108 MHz
AM 522 – 1620 kHz
FM wire antenna
Built-in AM antenna
0.4 W
3 W
2.25" diameter (57 mm), 8 Ohm impedance
Input: AC 230V ~ 50Hz,
Output: DC 6V 0.2A
56 (H) x 140 (W) x 118 (D) mm
0.45 Kg
4

Hide quick links:

Advertisement

loading