Download Print this page

Repeat Mode; Programmed Disc Play; Product Specifications - Teac crx-230 Owner's Manual

Cd radio alarm clock

Advertisement

REPEAT mode

Press the REPEAT button before or during play. A single track or all tracks can repeat.
Each press changes the repeat mode as follows:
1 REPEAT
2 REPEAT ALL
(Repeat indicator will remain on)
(Repeat indicator will flash)

PROGRAMMED DISC PLAY

Up to 32 tracks can be programmed to play in a specific order by following these steps.
1. Set the CD/AM/FM/BUZZER switch to CD.
2. Press the PROGRAM button.
3. Press the I<< or >>I button to select the track number.
4. Press the PROGRAM button when the desired track number is displayed.
5. Repeat step 3 and 4 to program more tracks.
6. Press the PLAY/PAUSE button to start programmed playback.
To check the program
• Press the PROGRAM button during stop mode. The track numbers are displayed in
programmed order.
To erase the program
• Press the PROGRAM button and then the STOP button when the CD is stopped
Opening the disc compartment will also erase the contents of program memory.
TO SET THE ALARM AND SET WAKE TO CD/RADIO BUZZER
The radio, buzzer or CD automatically sounds at the designated time every day.
1. Ensure alarrm switch on under side of unit is set to on. Press and hold ALARM button.
2. While holding down ALARM, use MINUTE and HOUR button to set the time to
come on.
3. The alarm indicator will always light up when alarm switch is set to on.
4. Slide the function select switch to CD, AM, FM, or Buzzer position, and adjust the
volume
5. To cancel the ALARM wake up, press the ALARM button.
3 REPEAT OFF
(Repeat indicator will turn off)
GB
SNOOZE
The alarm can be temporarily turned off by pressing the SNOOZE button; the alarm will
turn back on automatically 9 minutes later.
• Tune the desired radio station or insert a CD as previously instructed.
1. While in standby press the SLEEP button, the unit will turn on and the SLEEP
indicator will appear in the clock display.
2. Press and hold down the SLEEP button, use the MINUTE button to set the desired
sleep time.
3. TO cancel sleep time, press the SNOOZE or ON/OFF button again.

PRODUCT SPECIFICATIONS

RADIO
Receiving bands
AM/FM
AM 531 - 1602kHz
Frequency range
FM 87.5 - 108 MHz
GENERAL
240V ~ 50Hz
Power requirements
DC 9 V (1 X 6F22)battery for clock backup only
12W
Power consumption
0.8W X 2 RMS
Power Output
Dimension
230(W)mm X 84(H)mm x 158(D)mm
Weight
1.17kg(not including battery)
GB

Advertisement

loading