Specifications - Teac CRX060 User Manual

SNOOZE OPERATION
To get another 9 minutes sleep after the alarm rings, press the Snooze Button after the radio or the buzzer
sounds at the preset wake-up time. The Alarm Indicator will be flashing. This will silence the radio or the buzzer
for 9 minutes. You can repeat this operation for up to about 1 hour.
GOING TO SLEEP WITH THE SOUND OF THE RADIO
1. Press the Sleep Button to activate the Sleep function. The Sleep Indicator will on.
2. Press the Sleep Button repeatedly to select the sleeping time (minutes) as
90-80-70-60-50-40-30-20-10 -OFF (OFF meaning that Sleep function is cancelled). After setting the
sleeping time, the radio return to standby mode when it reached the sleep set time.
To turn off the Sleep function, simply press once the On/Standby Button. The Sleep Indicator will turn off and
the unit will return to Standby mode.
GOING TO SLEEP AND WAKENING TO THE SOUND OF THE UNIT
1. Repeat steps described in "TO SET THE ALARM TIME AND THE ALARM MODE" and "USE THE ALARM".
2. Press the Sleep Button and set the period of time you want to listen to the radio before it switches off
automatically.
3. The radio is now programmed to turn itself off after you go to sleep and the alarm will trigger automatically
at the preset wake-up time.
BATTERY BACK-UP
This clock radio has a back-up power system to ensure continuous operation of the clock in the event of a
power failure. The switch from AC to battery power is automatic. However, under battery power, the clock
display will not illuminate even though the clock maintains the correct time and stores the alarm time in the
memory. The system operates on 2x1.5V "AAA" size batteries (not included). We recommend the use of a long
life battery to ensure maximum performance.
CHECKING THE TIME DURING NO SUPPLY OF AC POWER (WITH BACKUP BATTERIES)
When there is no supply of AC power but the unit is fitted with 2x1.5V "AAA" size batteries (for backup), the
display will not show any information. However, you can still check the current time by pressing any button to
display the current time for a few seconds. The alarm is disabled while the clock is on backup battery power.
ANTENNA
The unit has a flexible wire on the back of the unit and it should be extended to its full length for best reception
white receiving FM radio. For AM, the radio is supplied with a built-in directional aerial, rotate the unit for the
best AM reception.

SPECIFICATIONS

Power Source : AC240V ~ 50Hz
DC3V
(battery not included)
Frequency Range : FM 87.5-108 MHz
AM 522-1620 kHz
Dimensions : 130(L) x 91(D) x 45(H) MM
Weight : 280g
Weight and dimensions are approximate because we continually strive to improve our products, specifications
may change without prior notice.
Teac CRX060 (Aust).p65
, 2x1.5V "AAA" size batteries type (for clock back-up)
7 2014/3/26, ¤U¤È 05:34