Teac CRX300iP Operating Instructions

Stereo Clock Radio for iPhone and iPods
CRX300iP
Operating Instructions
Please read this user's guide before using your new docking speaker
QUICK START
1.Connect the Power Source 2.Install the Backup Battery
Unlock the battery holder at the bottom of the unit,
Plug the AC adapter to CRX300iP unit
and insert the cell battery CR2032 (Not included)
5. Install the App
To begin setup, dock your iPhone/iPod Touch to the CRX300iP.
A dialogue box will appear, notifying that the TEAC iDock application is
absent. Follow the on-screen instructions to install the application.
Once installed, you can start using the CRX300iP.
NOTE: Please ensure you are connected to the WIFI system when downloading
the application and receiving weather updates.
CONTROLS AND INDICATIONS
SLEEP
Set sleep timer
and show status
TIME
Time settings
DISPLAY/MEMORY
Display preset, Alarm 1
and Alarm 2 settings in
ALARM
lower display
Set the alarm timer
Memorize preset
Turn ON/OFF the
stations in FM
alarm tone
radio mode.
ENTER,
SET+/- PLAY/PAUSE
Adjust the time, Alarm 1, Alarm 2 To enter selections,
and Sleep time. Set Alarm 1, Alarm 2
Program the radio atations settings.
Skips Tracks in iPhone/iPod Plays songs on the
Touch mode iPhone/iPod Touch list.
3.Extend the FM Wire
Extend the FM antenna as much as you can to
improve reception sensitivity
6. Preset Time/Alarm/Weather/FM Radio in the App
Alarm
Help
setting
12:35
Help
Weather
Tue, 02 Feb 2010
Guangzhou
Mostly Cloudy
High/Low Temperatre:
17/23 C
UV Index:
Setting
Time 5
Wind:
23 C From SSE at 17.7km/h
Humidity:
73%
17/23C 16/28C 15/17C 15/18C 16/21C
Tue Wed The Fri Sat
Weather Radio
Time Weather Radio Setting
Set up your personal settings in the App. For details, please follow the SETUP instructions in
App by pressing HELP
Tips: Please ensure you are connected to the network at all times when using the application to obtain the latest
Time and Weather updates.
Note: It is advised to leave the TEAC iDock Application active while docked in the CRX300iP docking tray.
When the application is off, the unit will cease weather and time updates.
PRESET INPUT VOL+/- POWER, ALARM
Set input selection Adjust volume RESET
Select a preset
Turn on the unit or
radio station
switch to standby mode.
Stop Alarm and reset
alarm for the next day.
SNOOZE/DIMMER
Snooze alarm mode
Dim display
12/24HR AUDIO IN
Set clock Audio source input
setting in 12/24hr
PUSH OPEN the docking tray and pull it all the way out, dock the iPhone/iPod into the cradle with the correct insert.
7.Sync App to the Unit
12:35
Help
Weather
Tue, 02 Feb 2010
Guangzhou
Mostly Cloudy
High/Low Temperatre:
17/23 C
UV Index:
5
Wind:
23 C From SSE at 17.7km/h
Humidity:
73%
17/23C 16/28C 15/17C 15/18C 16/21C
Tue Wed The Fri Sat
Time Weather Radio Setting
After the TEAC iDock Application settings are
completed, the current Time/Weather/Alarm will
be synced to the CRX300iP.
Unit is ready for operation.
AM/PM FM Stereo
Time/Volume/
Indicator mode Indicator
FM Step/Scan/
FM Preset/Memory
Indicator
FM MHZ
Indicator
Alarm Status
Indicator
Alarm Setting/
FM Current
AUX
Temperature*
/Date/Sleep
Wake To
Status Indicator
Weather
Indicator*
DC IN 5V
iPhone/FM/AUX High/Low Sleep Status
Input Indicator Temperature* Indicator
Connect AC
Indicator
adapter
NOTES: *Applicable when docking the iPhone/iPod Touch
with the App
4.Prepare the Docking
Use this insert For this iPhone/iPod
insert15 iPhone 3G/3GS
insert16 iPod touch 2G
insert17 nano 4G
NOTE: When inserting an iPhone/iPod Touch into the
CRX30iP, make sure the correct adapter is used. The
adapter should have been supplied with the Apple
product. If otherwise, the adapter can be purchased from
Apple stores or Apple web-site.