Do you have a question about the CRX-320 and is the answer not in the manual?
Questions and answers
Norman
April 6, 2025
How do you turn the radio off
2 comments:
Mr. Anderson
April 6, 2025
To turn off the Teac CRX-320 radio, press and hold the button used to turn off the radio.
This answer is automatically generated
Norman
April 6, 2025
@Mr. Anderson
Ross Bluck
April 29, 2025
Your CRX-320 Manual mentions a "Standby Mode" in the setting the clock and alarm section. What is this?
1 comments:
Mr. Anderson
May 15, 2025
In the Teac CRX-320 manual, "Standby Mode" refers to the state when the unit is powered on but not actively playing radio or audio. It is the mode where the clock is displayed, and you can access clock and alarm settings, such as by pressing and holding the CLK/MEM button to set the time.
This answer is automatically generated
Alan Woolford
April 19, 2025
how do i turn off the alarm crx320
1 comments:
Mr. Anderson
May 10, 2025
To turn off the alarm on the Teac CRX-320, press the button when the alarm sounds. The alarm will stop and sound again the next day.
This answer is automatically generated
Norman
April 5, 2025
I’m stuck in 18. :8.8. I’m trying to change clock time
1 comments:
Mr. Anderson
May 14, 2025
To change the clock time on a Teac CRX-320:
1. In standby mode, press and hold the CLK/MEM button. The hour and minute digits will flash. 2. Use the HOUR button to set the hour. 3. Use the MIN button to set the minutes. 4. Press the CLK/MEM button to confirm.
CRX-320 Dual Alarm Clock FM/AM PLL Radio Instruction Manual Thank you for buying this TEAC product. Please read this manual carefully to get the best performance from Dual Alarm Clock FM/AM PLL Radio...
PRECAUTIONS Follow the advice below to ensure the product is used correctly and safely. LOCATION . Do not use the unit in places which are extremely hot, cold, dusty, or humid. . Place the unit on a flat, level surface. .
Setting the clock and alarm Setting the clock 1. In standby mode, press and hold the CLK/MEM button. The hour/minute digits will flash. 2. Use the HOUR button to set the hours. 3. Use the MIN button to set the minutes. 4.
Preset radio stations You can store up to 10 stations for FM and up to 10 stations for AM. 1. Use the <TUNING> buttons to search for a station. Press and hold the CLK/MEM button to store the station and a number to be assigned for the preset will flash.
Page 6
Imported and Distributed in New Zealand by: Direct Imports (NZ) Ltd P O Box 72 Hastings 4156 www.teac.co.nz...
Need help?
Do you have a question about the CRX-320 and is the answer not in the manual?
Questions and answers
How do you turn the radio off
To turn off the Teac CRX-320 radio, press and hold the button used to turn off the radio.
This answer is automatically generated
@Mr. Anderson
Your CRX-320 Manual mentions a "Standby Mode" in the setting the clock and alarm section. What is this?
In the Teac CRX-320 manual, "Standby Mode" refers to the state when the unit is powered on but not actively playing radio or audio. It is the mode where the clock is displayed, and you can access clock and alarm settings, such as by pressing and holding the CLK/MEM button to set the time.
This answer is automatically generated
how do i turn off the alarm crx320
To turn off the alarm on the Teac CRX-320, press the button when the alarm sounds. The alarm will stop and sound again the next day.
This answer is automatically generated
I’m stuck in 18. :8.8. I’m trying to change clock time
To change the clock time on a Teac CRX-320:
1. In standby mode, press and hold the CLK/MEM button. The hour and minute digits will flash.
2. Use the HOUR button to set the hour.
3. Use the MIN button to set the minutes.
4. Press the CLK/MEM button to confirm.
This answer is automatically generated