DirecTV L14 User Manual page 27

Searching for your Remote Control Code.
If your device does not respond to the remote after trying all remote control codes listed for your
brand; or, if your brand is not listed, try searching for your remote control code.
For example, to search for a TV code for your equipment:
1. Slide the mode switch to TV.
2. Press and hold SELECT + MUTE for a few seconds until the LED blinks twice.
3. Enter 991. The LED blinks twice.
4. Enter the device ID code 1 for TV
5. Aim the remote at the TV and press OFF. The remote sends IR codes from the library to the
selected device, starting with the most popular code first.
6. If the TV responds, go to step 7. If the TV does not respond, press CHANNEL UP (CH UP).
The remote will try the next code. Continue until the TV responds.
7. To lock in the code, press SELECT once. The LED blinks twice.
Programming Your Remote Control
Chapter 1
18