DirecTV L14 User Manual page 20

Getting Started
TIP
To switch between watching your
VCR and watching video from your
DIRECTV Receiver, you may need
®
to program the INPuT key on your
DIRECTV remote. (See page 19 for
®
info.) Some TVs also have a MENu
button that allows you to change
the video source using an onscreen
menu. If you have trouble changing
the video source, refer to the
instructions that came with your TV.
11
Choose Your Setup
A/V Connection
Connect the 10-way DIN plug to the AV OUT jack on the back of the DIRECTV® Receiver.
If connecting directly to a TV, connect the white, red and yellow plugs on the other end of the A/V
cable to the AUDIO L (white) and R (red) and VIDEO (yellow) A/V input jacks on your TV.
If hooking up a VCR, connect the white, red and yellow plugs on the other end of the A/V cable to
the AUDIO L (white) and R (red) and VIDEO (yellow) A/V input jacks on your VCR.
Then, run an A/V cable from the VCR's A/V output to the TV's A/V inputs. This will allow you to
watch videotapes.