Rfid Trigger Mode - Motorola Symbol DS9808-R Manual

RFID Trigger Mode

Parameter # F1h 82h
In hand-held operation, this parameter controls the behavior of a trigger programmed for RFID reading.
•
Continuous - the reader reads all tags within range, maintaining the existing tag cache so it does not report
tags already read.
•
Single Tag Read - the reader reads and reports only one tag. It maintains the tag cache and reports this tag
regardless of whether it already reported it.
•
Continuous Re-Report - the reader reads all tags within range, maintaining the tag cache, and reports each
tag once within this trigger session regardless of whether it already reported it.
•
Continuous Flush - the reader flushes the tag cache, reads all tags within range, and reports them as new
tags.
NOTE To program the trigger for various functions including RFID, see
and Host Triggering on page
*Continuous
(00h)
Continuous Re-Report
(02h)
3-9.
RFID Preferences 3 - 15
Multifunction Mode Triggering on page 3-4
Single Tag
(01h)
Continuous Flush
(03h)