Chapter 4 SSI Interface
Introduction
When connected to a a Simple Serial Interface (SSI) host, program the digital scanner via bar code menu or SSI
host commands.
Throughout the programming bar code menus, asterisks (
NOTE Most computer monitors allow scanning the bar codes directly on the screen. When scanning from the
screen, be sure to set the document magnification to a level where you can see the bar code clearly, and
bars and/or spaces are not merging.
*
*
Baud Rate 9600
Indicates Default
*
) indicate default values.
Feature/Option
(06h)
Option Hex Value for
programming via SSI
command