Chapter 3 Rfid Preferences; Introduction - Motorola Symbol DS9808-R Manual

Chapter 3 RFID Preferences

Introduction

NOTE The RFID module is not available in all countries. Contact a Motorola sales representative for more
information.
You can program the digital scanner to perform various functions, or activate different features. This chapter
describes RFID preference features and provides programming bar codes for selecting these features. To program
other features, refer to the Symbol DS9808 Product Reference Guide.
The digital scanner ships with the settings in
values suit requirements, programming is not necessary.
To set feature values, scan a single bar code or a short bar code sequence. The settings are stored in non-volatile
memory and are preserved even when you power down the digital scanner.
NOTE Most computer monitors allow scanning the bar codes directly on the screen. When scanning from the
screen, be sure to set the document magnification to a level where you can see the bar code clearly, and
bars and/or spaces are not merging.
If not using a USB cable, select a host type after the power-up beeps sound. Refer to the Symbol DS9808 Product
Reference Guide for specific host information. This is only necessary upon the first power-up when connecting to a
new host.
To return all features to default values, scan the
Guide. Throughout the programming bar code menus, asterisks (
*
*Medium to High Tone (2-Tone)
Indicates Default
RFID Preferences Parameter Defaults on page
parameter in the Symbol DS9808 Product Reference
Set Default
*
) indicate default values.
(04h)
3-2. If the default
Feature/Option
Option Hex Value