Manual And Quick Closes - TeleCheck Eclipse Reference Manual

6.0 Manual and Quick Closes

The Close transaction is an end-of-the-day close out of the terminal to settle with the host. To perform a Manual-
Close, the user has to select the CLOSE key, confirms that he wants to close, enters the amount, and
presses the ENTER key. To perform a Quick Close, the user selects the CLOSE key and confirms that he wants to
close (entering of amount is not required). The Sale, Refund and Force keys become inoperable until the Close
procedure has completed.
1.0 Press the CREDIT Button to start a Close transaction.
1.1 Press the MORE Button.
1.1 Press the CLOSE button.
2.0 CONFIRM CLOSE
YES NO
3.0 BATCH TOTAL AMT
6.0 <see section 6.1
for displays>
7.0 CLOSE OK
CLOSE 999999
XXXXXXXXXX
User: Press the YES key to continue the CLOSE
routine. Press the NO key to return to idle.
Term: If the YES key was pressed, then
skip to step 6 if quick close is on.
continue at next step. If NO or any other key was
pressed, return to
User: Enter the net credit card total amount for day and
$0.00 press the [ENTER] key.
Note - If the total of all valid sales is a negative amount,
enter '-' before entering the dollar amount.
Term: Compare the entered value to the stored totals. If
they equal then proceed to next step.
Create the closing request packet.
Skip if Auto Insert Parameter = YES.
User: No action required.
Term: Dial the Host, send the request, then wait for the
Host response.
User: No action required.
Term: Display host Response. If OK, print reports, clear
batch, and clear close flag.
NOTE - XXXXXXXX
1999 TeleCheck International, Inc. CONFIDENTIAL
25
Or else
IDLE prompt.
= BATCH ID returned from host