Table of Contents
Advertisement
5.4 Debit Sale Authorization
The Debit Sale transaction will call the Host to determine authorization. A receipt must always be printed
with a Debit Transaction. Manual entry of card data is not allowed.
P1000 or P2000 supported using master session. Master Key placed on key 8 .
1.0
Press the Other Button to get to Debit Transaction.
1.1
Press the Debit Button. If Debit is enabled go to step 1.3. Else error Beep. and display Debit not Enabled.
1.2
Press the DEBIT SALE button.
1.3
PIN PAD NOT
RESPONDING
1.4
1.5
MASTER KEY
NOT LOADED
1.6
1.7
WORKING KEY
NOT FOUND
2.0
DEBIT SALE
Pin Pad
Term:
Check to see if pin pad is functional.
If pin pad OK, go to step 1.3 If pin pad
not connected or does not return proper
status, go to step 1.3
User:
Hit the clear key to return to idle. Check
cable ,connection, etc.
Term:
Beep and display error message. Keep checking for
pin
pad. Beep every 1.5 seconds until user hits clear key.
Then return to idle prompt.
User:
No action.
Term:
Verify that master key 8 is loaded. If master
key is okay, proceed to step 1.6. If master key
not found, proceed to step 1.6
User:
Hit the clear key. Call CES.
Term:
Beep and display error message. Wait for user to hit
the clear key and then return to IDLE.
User:
No action.
Term:
Verify that working key is loaded. If working
key is okay, proceed to step 2.0. If working key
not found, proceed to step 1.7
User:
Hit the clear key. Load working key.
Term:
Beep and display error message. Wait for user to hit
the clear key and return to the idle prompt.
User:
If P1000 used, clerk should swipe card on NG
1999 TeleCheck International, Inc. CONFIDENTIAL
18
should be connected to Serial 3.
pin pad
Hide quick links:
Advertisement
Table of Contents
