Making Calls; Making An External Call; Ending A Call; Accepting A Call - Siemens Gigaset E49H User Manual

Making calls

Making an external call

External calls are calls using the public
telephone network.
~ c
Enter the number and press the
talk key.
Or:
c ~ Press and hold the talk key c
and then enter the number.
You can cancel the dialling operation with
the end call key a.
You are shown the duration of the call while
the call is in progress.
Please
Dialling using the directory, the call-by-
¢
call list ( page 1/
calls and last number redial list
¢ ¢
( page 23/ page 23) saves you from
having to re-enter numbers and network
provider prefixes ("call-by-call num-
bers").

Ending a call

a
Press the end call key.

Accepting a call

The handset indicates an incoming call in
three ways: by ringing, by a display on the
screen and by the flashing handsfree key
d.
You can accept the call by:
¤
Pressing the talk key c.
¤
Pressing the handsfree key d.
If the handset is in the charging cradle and
the Auto Answer function is activated
¢
( page 28), the handset will automatically
accept a call when you lift it out of the cradle.
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 4846
¢
page 21) or the
To deactivate the ring tone, press the
display key. You can accept the call as long as
it is displayed on the screen.

Handsfree talking

In handsfree mode, instead of holding the
handset to your ear you can put it down, for
example on the table in front of you. This
allows others to participate in the call.
Activating/deactivating handsfree
mode
Activating while dialling
~ d
Enter the number and press the
handsfree key.
¤
You should inform your caller before you
use the handsfree function so that they
know someone else is listening.
Switching between handset and
handsfree mode
d
Press the handsfree key.
Activate/deactivate handsfree during a call.
If you wish to place the handset in the charg-
ing cradle during a call:
¤
Press and hold the handsfree key d
while placing the handset in the base sta-
tion. If handsfree key d does not light
up, press the key again.
For instructions on how to adjust the loud-
¢
speaker volume, page 29.

Switch to mute

You can deactivate the microphone in your
handset during an external call. The other
party then hears hold music (depending on
the base station).
u
Press the control key on the left
to mute the handset.
"
Press the display key to switch
the microphone back on.
You can turn the hold music on and off.
Making calls
§Silence§
19