Emblaze-VCON VCB5 User Manual page 59

Command
Syntax
Description
Command
Syntax
Description
Command
Syntax
Description
Command
Syntax
Description
Parameters
Command
Syntax
Description
Emblaze-VCON VCB5 User's Guide
services
services <service substring>
Lists the services that start with the substring and displays
their status.
services VCON will list only VCON services. For example,
•
VCON VCB AGENT_1
setgkaddress
setgkaddress <IP address>
Define an IP address to the associated MXM.
setmcuaddress
setmcuaddress <IP address>
Define an IP address to this VCB.
setparam
setparam <param>
Define the specified parameter.
dhcp <0-3> - Enable DHCP to define the IP configuration
of the specified NIC.
ipstatic <0-3><IP address><Subnet><Gateway> - Define a
static IP configuration of the specified NIC.
machinename - Define the name of the node.
time - Set the current system date and time.
setpassword
setpassword <user name>
Defines the user password. If a user name is specified, the
password change applies to that user name only.
10 SSH Commands
51