Inviting From Other H.323 Videoconferencing Applications - Emblaze-VCON VCB5 User Manual

7 Ad-Hoc Conferencing
7.4 Inviting from Other H.323
Videoconferencing Applications
In VCON's MediaConnect 6000 and other H.323 videoconferencing applications,
you must enter a code in order to invite other users to an ad-hoc videoconference. If
you do not know the code, ask the system administrator.
To invite and join other parties into an ad-hoc
videoconference
During an ongoing point-to-point videoconference, open your application's
1
Dialing utility.
Dial *77 (or an administrator-defined value) followed by the [additional
2
user's directory number]. For example, dial *77751 to invite end point 751
into the videoconference.
After dialing, an Incoming Call message may appear. Accept the call.
3
The session is now a multipoint conference. The parties' video is displayed
in Continuous Presence (multiple users' video on screen at all times) or
Voice-Activated Switching (speaker's video only on screen), in accordance
with the MCU/VCB Service configuration.
40 Emblaze-VCON VCB5 User's Guide