Emblaze-VCON VCB5 User Manual page 57

Command
Syntax
Description
Parameters
Command
Syntax
Description
Parameters
Command
Syntax
Description
Command
Syntax
Description
Emblaze-VCON VCB5 User's Guide
getparam
getparam <param>
Retrieve the specified parameter.
appver - Display the VCB/MXM application version.
dhcp <0-3> - Display DHCP-defined IP configuration of
the specified NIC, and if it's enabled or disabled.
hwserial - The first NIC's MAC address.
machinename - The name of the node.
sshver - Display the SSH Server version.
time - Display the current system date and time.
getvcbadminparam
getvcbadminparam <1> <param>.
Retrieve the specified VCB Admin parameter.
Name and password of the administrator.
For example:
getvcbadminparam 1 password 1234
getvcbridgeparam
getvcbridgeparam <param>
Retrieve the specified VCB parameter.
To display a list of parameters, type only the command and
press <Enter>.
getvcbsessionparam
getvcbsessionparam <service number> <param>.
Retrieve the specified VCB Session parameter.
To display a list of parameters, type only the command and
press <Enter>.
10 SSH Commands
49