Dedicated Service For A Zone - Emblaze-VCON VCB5 User Manual

5.2

Dedicated Service for a Zone

A dedicated ad-hoc service for a neighboring zone may be used only if any of that
zone's end points are in the resulting ad-hoc conference (either one of the original
two end points of the conference or the invited end point).
To dedicate a service to a specific end point
In the MXM Administrator, double-click the VCB Service and then click the
1
Session tab.
Select Use this
2
service as an ad-
hoc conference
resource and then
click OK (in addition,
you may also set the
service to be exclusive
for ad-hoc conferences
only).
Double-click the neighboring zone and then click the MCU Services tab.
3
In the
4
Dedicated
MCU
Service list,
select the
service.
Click OK.
Emblaze-VCON VCB5 User's Guide
5 Setting Up a Dedicated VCB Service
31