Introduction; Legend; Basic Operation; Auditory Feedback (Beep Tones) - Digiplex DGP2-641 System Manager's Manual

1.0

Introduction

Thank you for choosing Paradox Security Systems. Digiplex security systems offer advanced technology and
provide reliable security protection and powerful features that are easy to use. The elegant and user-friendly LCD
keypad allows you easy access to your security system's functions and information at the touch of a button. The 32-
character LCD screen displays messages and menus to guide you through the system's operations. Your installer
can even customize the messages for your home or business.
Since you will communicate your instructions to your system through the keypad, please read this manual carefully
and have your installer explain basic system operation.
If you have the InTouch Voice Assisted Arm/Disarm Module (APR3-ADM2) connected to your Digiplex security
system, please refer to page 16 for operating instructions.
1.1

Legend

[
SQUARE BRACKETS
2.0

Basic Operation

The following sections will introduce you to the roles of the buttons, lights, and messages on your LCD keypad.
AC Light:
ON = AC power
OFF = Power failure
STATUS Light:
When Green:
ON = All zones are closed.
OFF = One or more zones are open.
FLASH = Exit Delay
When Red:
ON = Area(s) armed
OFF = Area(s) disarmed
FLASH = System in Alarm
2.1

Auditory Feedback (Beep Tones)

When you enter information on the keypad, the keypad will guide you with beep tones to communicate the
acceptance or rejection of your entries.
Confirmation Beep: When an operation (i.e. arming/disarming) is successfully entered or when the system
switches to a new status/mode, the keypad emits an intermittent beep tone ("
Rejection Beep: When the system reverts to a previous status, or when an operation is incorrectly entered, the
keypad emits a continuous beep tone ("
Indicates a warning or an important note.
Indicates useful information or a tip.
] Indicates information that must be entered on the keypad.
Figure 1: Basic Overview
ACTION BUTTONS:
Each button's function is explained in the following sections of the manual.
[ ] = Erases current data entry
CLEAR
or reverts to the preceding step.
BEEEEEEEEEEP
Use the arrow buttons to scroll
through the current menu when
the arrows appear in the LCD
screen.
[ ] = Saves current data and
ENTER
exits current menu.
BEEP
").
The LCD screen will guide you
with detailed messages.
- - - -
BEEP BEEP BEEP BEEP
LCD Keypad 1
").