Weider 831.159360 User Manual page 11

Weuder

Hide thumbs Also See for 831.159360:

21. Wrap the Medium Cable (23) around a 3 1/2"

Pulley (15). Attach the Pulley to the Top

Frame (55) with a 3/8" x 1 3/4" Bolt (87) and a

3/8" Nylon Locknut (21).

22. Wrap the Medium Cable (23) around a 3 1/2"

Pulley (15). Attach the Pulley to the Top

Frame (55) with a 3/8" x 1 3/4" Bolt (87) and a

3/8" Nylon Locknut (21).

23. Attach the Medium Cable (23) to the Small

"U"-Bracket (67) with a 1/4" Nylon Locknut (2)

and a 1/4" Flat Washer (10). Do not com-

pletely tighten the Nylon Locknut. It

should be threaded onto the end of the

Cable only a couple of turns, as shown in

the inset drawing.

24. Locate the Short Cable (58). Attach the

Short Cable to the Rear Upright (56) with a

5/16" x 3" Bolt (93), a 5/16" Flat Washer (8),

and two 5/16" Nylon Jam Nuts (84). The end

of the Cable must be between the two

Nylon Jam Nuts and there must be

enough room between the Nylon Jam Nuts

for the end of the Cable to pivot.

Wrap the Short Cable (58) around a 3 1/2"

Pulley (15). Attach the Pulley and a Cable

Trap (66) to the Squat Arm (79) with a 3/8" x

3 3/4" Bolt (71), a 3/8" Flat Washer (9), and a

3/8" Nylon Lock Nut (21). The Cable Trap

must be turned to hold the Cable in place.

Table of Contents