Step
Screw (quantity)
3
M2 × 5 mm, flat-head, nylon-coated (1)
4
M2 × 5 mm, flat-head, nylon-coated (2)
In step 6 , release the antenna cables from the cable guides.
Notes:
1. Route the antenna cables along the cable guides. When you route the cables, do
not tense them. To do so, the cables may get damaged by the cable guides of
the frame, and may cause a broken wire.
2. Make sure that the connector 5 is attached firmly.
(continued)
Removing and replacing a FRU
4
3
4
5
6
Color
Black
Black
ThinkPad Z61e, Z61m, and Z61p
Torque
0.196 Nm
(2.0 kgfcm)
0.296 Nm
(3.0 kgfcm)
85